The Medieval Drawbridge
Enjoy this simple project of a drawbridge that I made. I was inspired from the typical bridges that were used in medieval times, thanks to these the enemies could not follow you if the bridge was lifted up.
To make this model I used a rigid 3mm cardboard sheet.
Follow my brief tutorial and enjoy the final result!
Edoardo Santinoli
To make this model I used a rigid 3mm cardboard sheet.
Follow my brief tutorial and enjoy the final result!
Edoardo Santinoli
Downloads
Lasercut Drawing
First I drew all of the pieces on Cad and saved them as a DXF file.
Then I got my file into the Lasercut machine which drew the same on the 3mm cardboard sheet.
This is how the pieces looked like!
Then I got my file into the Lasercut machine which drew the same on the 3mm cardboard sheet.
This is how the pieces looked like!
Dividing Pieces + Other Material Needed
Next I divided the pieces and got the other material needed to get it working;
- A small wooden stick with a 8mm diameter.
- Glue
- Litte string
-Tools
- A small wooden stick with a 8mm diameter.
- Glue
- Litte string
-Tools
Assembling All Parts
This model has got different parts that have to be glued and others that don't, so that they can move and get it working.
These images show the work in progress!
These images show the work in progress!
How It Works!
How it works!