The Nintendo Switch Blue Joy Con

This Nintendo switch joy con actually has a joystick guaranteed to spin.This took us about 5 days.Please consider voting for the Joy Con.

Folk art 2934e licorice

Folk art 2921e Aqua

CardBoard

Hot Glue Gun

Tweezers

Pocket Knife

A Blue Sharpie

4 Pennies

1 gold dollar

Pencil

Paper

Pen

Sandpaper

First draw the design of the blue joy con and outline it with blue sharpie.

Second Cut it out and then trace it on the cardboard with blue sharpie.

Third cut it out with a pocket knife.

Fourth sand the two pieces with sandpaper.

Fifth cut a 10in by 1in piece of cardboard.

Sixth peel one of the pieces off of the cardboard. Then bend it. When tearing off the outer layer it helps it bend more easily.

Seventh cut a piece of cardboard 19 cm by 1 in.

Eighth put a 1x2 Lego on the top. A gold coin for the joy stick,4 pennies for the arrows and 1 2x2 Lego for the picture button on the bottom.

Ninth trace all the coins on the piece of cardboard and cut them out with a carving knife.

Tenth cut the holes in the blue joy con. Then paint all the buttons.

Eleventh cut a 8 cm by 1cm piece of cardboard. Then paint it black.

Twelfth cut a 17 cm by 2 cm piece of cardboard. Then paint it black.

Thirteenth cut a piece of cardboard that is 2 cm by ½ cm. Then paint it blue.

Fourteenth wait for everything to dry.

Fifteenth measure another a piece that is 5cm by 3cm and the bottom length 1 cm.

Sixteenth tear off the back and bend it.Paint it black.

Seventeenth make a piece of cardboard 4 ¼ in by 2 ½ in and the slant

Eighteenth make a piece of cardboard 5 ½ in by 4 in.

Nineteenth paint the (5cm by 3 cm and bottom length 1 cm) black. (Paint the 5 ½ in by 4 in) blue. Paint the (4 ¼ in by 3 ½ in and aslant of ¾ in). Make a piece of cardboard 1 ¾ in by 1 in and paint it blue. Then make a piece of cardboard that is 1 ¼ in by ¾ in. Then paint it blue. After you paint them hot glue all them together.

Twentieth make a piece of cardboard that is 1 ½ in by ½ in and the top 1 in.

Twenty-first make a piece that is 2in by ½ in and 1 ½ on top.

Twenty-second make a piece of cardboard that is 1 in by ½ in.

Twenty- third paint them (1 ½ in by ½ in and the top 1 in), (2in by ½ in and 1 ½ on top) and (the cardboard that is 1 in by ½ in) all blue.

Twenty-fourth print this joy stick “https://www.thingiverse.com/thing:2169036”.Use tweezers to take out the bottom of it.Make sure to watch her video explaining how to take them out.

Twenty-fifth poke out the hole (Golden dollar) for the joy stick. Put the joy stick through the hole.

Twenty-sixth glue on the side of the Joy Con.

Twenty-seventh get the long black piece and put the 2 small blue pieces on their with a hot glue gun.

Twenty-eighth put the long black piece on the Joy Cons side. Hot glue the back on to the Joy Con.