Obstacle Avoiding Robot
his Instructable Article is about the Virtual Obstacle Avoiding Robot which make the circuit to move forward when the distance is greater than 15 cms between the Robot and the Object else it will make the robot to go right.
Components We Need
The following are the Components requried:
Breadboard - 1 Nos.L293D Motor Driver - 1 Nos.Motor - 2 Nos.Arduino UNO - 1 Nos.Ultrasonic Sensor - 1 Nos.
Connections
Connect the following connections as shown in the above picture using the TinkerCAD Software
Code Block
Assemble the Code Blocks as shown in the above Image using the TinkerCAD Software