The Pop Speaker

by omyo0001 in Workshop > 3D Printing

260 Views, 0 Favorites, 0 Comments

The Pop Speaker

FINAL SPEAKER 2.PNG
exploded view.PNG

3D Printed Bluetooth Speaker

Materials:

3D Printer (minimum 10mm x10mm x10mm)

Kmart Bluetooth Speaker ($10)

Pliers

Soldering Iron

Step 1: Download the Stl Files and Print Them

70779358_381276022545384_8680213163884412928_n.jpg

Note: More support creates better forms due to complicated geometry but the print time will significantly increase.

Remove the support with pliers as shown.

Cut of random strands of hanging filament.

Downloads

Layer 1.stl
Layer 2.stl
Layer 3.stl
Layer 4.stl
Box.stl

Step 2: Assemble the Top 3 Layers

70140611_2442816562710364_8022279398826704896_ntp.jpg
70282367_452224598714597_1882031115506548736_n.jpg
70768204_2389306477820395_8926425131950014464_n.jpg
70512602_381075132834006_7676036847868313600_n.jpg
70255435_362995987987221_6277674351890268160_n (1).jpg

Align the connections and press them together as shown in the images.

Step 3: Take the Kmart Bluetooth Speaker Apart

70493573_1208555679350571_3068211420924477440_n.jpg

Take out the battery, circuit, and speaker driver.

Use a soldering iron to remove the components as shown.

Step 4: Attach the Speaker Driver

70642324_994249340967117_3973799034698596352_n.jpg

Push the speaker driver into layer 3's central slot as shown.

Step 5: Attach Layer 4

70987425_400686427256206_6982936685159907328_n.jpg

Attach layer 4 to layer 3 by pressing together.

Step 6: Connect the Box

70943511_2113677805593645_1283113104493772800_n.jpg
69944324_380547219278761_3719204475882176512_n.jpg
69393270_233667830917906_8652976869294997504_n.jpg
69870978_513164162774705_3147424430477541376_n.jpg

Put the wire through the hole of the box.

Solder the battery and speaker driver wires as shown.

Then slot the wire and battery into the box.

NOTE: make sure the battery is on top of the circuit which will sit on the two small shelves.

Connect the box to the 4 layers and close the lid by pressing them together.

Step 7: Completion!

70513285_405634166761327_9063354758135283712_n.jpg

Just slide the switch, connect to the Bluetooth, and enjoy!