The Recyclable Candy Dispencer

by bryce.dory.2020 in Craft > Art

800 Views, 3 Favorites, 0 Comments

The Recyclable Candy Dispencer

image.jpg

Why I made it:

- I made a recyclable candy dispenser because a lot of people eat candy especially kids and my reason being is you don't want someones hands touching your candy. Like for example I was gonna get m&ms and my cousin just came from out side and he touched all the candy and i didn't want know more because his hands where dirty and had germs on them. I did not want it happening again so i made a solution I made a candy dispenser out of recyclables it was really easy and all you need is recyclables laying around the house and two supply's u can buy.

How to Build the Candy Dispenser:

image.jpg
image.jpg
IMG_0004.JPG

Step 1 :

- Get your supply's

You will need foam board or card board 12 x 12 cm.

paper / plastic cups.

Hot glue

Hot glue gun

Exact o knife

Ruler in inches

How to Build the Candy Dispenser:

IMG_0004.JPG

Step 2:

Heat up your hot glue gun so you can later on put every thing together.

How to Build the Candy Dispenser:

IMG_0006.JPG

Step 3:

Get your foam board and get your measurements and get four even squares of foam bored its later gonna be the base of your candy dispenser.

How to Build the Candy Dispenser:

IMG_0007.JPG

Step 4:


Cut out the foam board into even squares.

How to Build the Candy Dispenser:

image.jpg

Step 5:

Get the preheated hot glue gun and glue all the pieces together and that will make your base.

How to Build the Candy Dispenser:

image.jpg

Step 6:

Get your two cups and hot glue them together too make the dispenser.

How to Build the Candy Dispenser:

image.jpg

Step 7:

Cut out a little tab at the button of the cup

How to Build the Candy Dispenser:

image.jpg

Step 8:

Put the dispenser in the base and hot glue them together.

How to Build the Candy Dispenser:

image.jpg

Step 9:

Cut a hole at the top of the dispenser.

How Too Build the Candy Dispenser:

Step 10:
M&Ms and put them in the dispenser and watch the the candy dispenser do its work.

Pros and Cons

Pros:

  • Eco friendly
  • recyclable
  • reusable
  • safe
  • remake able

Cons:

  • time consuming
  • non cleanable
  • can break easily
  • can only hold a small portion of m&ms

Conclusion :

In conclusion my project is an improvement on a normal candy dispenser. A benefit to the user of this item cause instead of people reaching in your bag of M&M's with their dirty hands they can use a dispenser reduce spread of disease. Also you can make it out of anything such as foam board, card board, plastic or paper cups . It is also healthy for the environment being it is recyclable and can be reused. It can be reused as Foam board and paper products such as paper plates.