The Table Saw Chess Set
by sir woodster in Living > Toys & Games
4241 Views, 72 Favorites, 0 Comments
The Table Saw Chess Set
in this instructable i am going to make the dark side of my chess set.
i the only tools you wil need is a table saw (and a cross cut sled)
this prodject is great for biginers how want to gain confidens with the tablesaw
Resaw the Wood
i used a reclaimed 2x4 for this prodject,
and after making sure that thare ware no more nails in the wood . I used my tablesaw to make rectangulair pieces.
than i used it to make them the right hight.
The Pawns
to make the pawns i made a shalow cut on all 4. sides with my table saw
The Knights
i made a big part of the horses on the table saw . and i put the detail in with the dremmel tool
The Rook
i made the rooks with the table saw. i advise using a croscut sled with a stop block. but becouse i don't have one i used some totaly dangerous way to do this.
The Bishop , Queen and King
the bishop
to make the bishop i put the blade at 45° and made a cut on top half way thrue .
the queen and king
these pieces are a combinations of the pawns and the rooks [see the picture]
to make the bishop i put the blade at 45° and made a cut on top half way thrue .
the queen and king
these pieces are a combinations of the pawns and the rooks [see the picture]
Staining
this is the dark side of my chess set so to make it dark i used furniture stain that i had laying around.
The Foot
i decided that the pieces looked to mutch alike so i sawed some squars of the same langth and with as the chess pieces . than i gleud the squars to the knights, rooks, bishops ,queen and the king. so that al the pieces in the back ware biger than the pawn's