The Extreme ShOcKeR!!!#%@&

by TheShockingElectricMan in Circuits > Electronics

2508 Views, 9 Favorites, 0 Comments

The Extreme ShOcKeR!!!#%@&

temp_-1355485281.jpg
Hello, is your sister getting on your nerves? Is someone stealing at school or cheating on you? Well, worry no more! today we are going to make a extreme shocker that delivers enough voltage to really buzz um. I doubt after one shock they will come back!

What Do You Want to Do This For?

temp_2066471436.jpg
Well how about at school a punk bully is picking on you. Or you need protected in a emergency. What if you have a robber break in? Well this project is right for you! Who needs to dial 911?(im not saying dont) Lets just take care of it ourselves! (Disclaimer)-//Im just giving a good intro, always dial 911 in emergencies. But do realize this is not a toy and can hurt you very bad.

What You Need

temp_194965251.jpg
temp_-1592500995.jpg
Before you begin, you may want to see how dangerous it really is.

Here is a link to a video were I shock a few things!
http://www.youtube.com/watch?v=2F2eV6itIF4&feature=youtube_gdata_player


You will need a disposable camera

Tape

Hot glue

Solder

Soldering iron

Wires

AA batteries

AA holder (optional you can tape wires to the leads if you want)

A container (optional)

Tacs (optional)

Now i used screws instead of tacs, but with either you need to have a plastic container so You Dont Get Shocked!

Taking It Apart

temp_1861833759.jpg
temp_-1006070863.jpg
Disasemble the camera and take the circuit board out.

Be careful there is 300V on that capacitor in the second picture.

Now carefully take a screw driver and touch the two leads with it and it will give quite a burst.

Connecting the Capacitor

temp_1250870751.jpg
Solder to of the switch wires to the two terminals that charge the circuit. Now solder or glue or splice wires to the capacitor leads and strip the ends.

Solder two wires to the AA holder that comes with it so it gets power easier.

put the AA in its holder, charge it up and test it!

Here is mine in action!

https://www.youtube.com/watch?v=2F2eV6itIF4&feature=youtube_gdata_player

Please subscribe to my new youtube channel i will be doing all kinds of tutorials there too!

Finishing

temp_-1017282023.jpg
temp_1233633671.jpg
temp_116191526.jpg
Put it all safely in some container make sure its plastic so you dont get shocked though

Secure with glue and isolate,

Put tacs on the end and there you go!

im not responsible if you kill someone so dont blame me its your action