Tile Dominator

The paper.io of board games

• Suggestions
• Two 10x15 in. plywood board
• Red Spray Paint
• Blue Spray Paint

Suggestions

• Two six-sided die
• Pencil

Create a grid in Gravit Designer. More specifically, create a 10x15 grid using squares with spaces in between and export it as a svg file. Mimic the image.

Laser cut a slab of wood (1/8 inch plywood suggested) to mimic the design.

Laser cut another slab of wood (1/8 inch plywood also suggested) that is the same size as the grid. Do not put anything on this one.

Glue the two wood pieces on top of each other. (Wood glue suggested)

Spray paint the smaller wooden square that were a by-product from the laser-cutting. Paint one side red and the other side blue.

Wait for the pieces to dry and you're done.

• Draw images on the wood
• Use this ruleset for the game specifically
  • The two players choose between a big red or big blue tile.
  • Both players roll the dice and move accordingly. A player can go up, down, left, and right, but they can't go diagonally.
  • A player can go over an opponent’s tiles, which will turn the opponent’s tiles into the player’s tiles.
  • If the player creates a square of tiles, the spots inside will be filled (like paper.io).
  • If a player goes over their own tiles, they can “slide” over the tiles.