Tinkcercad Entry Desk Tidy

Hi guys! I am a student using Tinkercad, and this is my entry for the competition. I decided to create a desk tidy in tinkercad.

First of all we need to create a base for the desk tidy. For this all we need to do is drag a cube and shape it out to a nice flat rectangle. My dimensions were 131 x 128 and a height of 10.

Next, we need to create the pencil holder. For this, we grab a cylinder and shape it. My dimensions were 25 x 25 and a height of 33.

After that we create the pencils. This wasn't necessary, but it looks good. Just drag a pencil from the 'At home' tab. Then just size it appropriately. My dimensions were about 15 x 22 and a height of 58. Note: This isn't to scale in the real world. After that just drag it into the cylinder, check it is in the right position and group it.

Just duplicate the pencil holder, and then position them onto the base of the desk tidy.

After that, grab a cup, and size it appropriately. Go ahead and put it next to the pencils.

Just grab a cube and size it to look like an eraser. You could position it wherever you have space.

This step isn't necessary, but I just wanted to show that there is still room for a book/device. If you want to recreate a book/device, just grab a cube and size it so it looks like what you want. If you were making an iPad, you could even build a stand for it.

And that was how to make a desk tidy in Tinkercad. Note: Remember to group everything at the end. If you have a 3d printer, you could print it out. Thank you for your time, and good luck to all my competitors!