TinkerCAD Log Cabin

In this project you will learn on how to make a basic TinkerCAD log cabin That is simple and very easy to make

Open your TinkerCAD and start a new project and name it, Log Cabin

To make the cabin you need to have a base.

to do this you need to grab a box and make it take up the whole work plain

to start the cabin you need to extend a cylinder to any length you want and do the same for another connected to the other end of the 1st cylinder

after you do that you must group and copy a paste ONLY the cylinders and make the first level of the walls

after that you must group the WALLS together and stack(after copying and pasting) them untill there are 5 to 4 levels on the Cabin

to create the door first you need to put a hole in the wall of the Cabin then take one box and a sphere and combine them to make a door and install it to the Cabin

on the inside of the Cabin you can put in furniture or other decor in from the Hangout space section in Tinker CAD

For the roof you must have a triangle roof and 2 polygon hole shapes

1st Adjust the roof so it fits your Cabin

2nd put the polygon holes in the front and back flat end of the roof and combine all of your shapes

Now you have a completed TinkerCAD 3D log Cabin

With this build you can also make a Campground like the one I sort of started here in the picture above

thanks for building this with me!