Tinkercad Treadmill

by brendan.tan23 in Craft > Digital Graphics

536 Views, 1 Favorites, 0 Comments

Tinkercad Treadmill

Screen Shot 2021-02-11 at 3.19.46 PM.png

Today you will learn how to make a treadmill in Tinkercad

Screen Shot 2021-02-11 at 3.15.46 PM.png

Make a flat rectangular plat form with a height of 1

Screen Shot 2021-02-11 at 3.15.57 PM.png

Make two identical thin rectangles with the same length of the platform

Screen Shot 2021-02-11 at 3.17.24 PM.png

Place them on the edges of the platform

Screen Shot 2021-02-11 at 3.16.28 PM.png

Make two identical thin poles with cylinders

Screen Shot 2021-02-11 at 3.16.38 PM.png

Place them on the corners of the platform as shown

Screen Shot 2021-02-11 at 3.17.51 PM.png

Make two duplicate semicircles at a small size

Screen Shot 2021-02-11 at 3.18.17 PM.png

Cut off about 1/3 of the semicircles

Screen Shot 2021-02-11 at 3.18.49 PM.png

Turn them upside down

Screen Shot 2021-02-11 at 3.19.06 PM.png

Place them on the top of the poles

Screen Shot 2021-02-11 at 3.19.25 PM.png

Make a bigger flat semicircle

Screen Shot 2021-02-11 at 3.19.37 PM.png

Put it on top of the poles

Screen Shot 2021-02-11 at 3.19.46 PM.png

Place a flat square on the big semicircle

Finally, group all. Now you have a Tinkercad treadmill!