Tire Plug: Gorilla Glue Edition

98529 Views, 17 Favorites, 0 Comments

Tire Plug: Gorilla Glue Edition

Unlike traditional tire repair, "Tire Plug: Gorilla Glue Edition" eliminates the hassel of pluging a tire.

Required equipment:
flat tire
screwdriver
pliers
a few corse thread screws of various sizes
Gorilla Glue
air compressor

Step 1: Find the Hole

Locate the punctured hole on the flat tire.

Step 2: Remove the Object

Remove the screw or nail from the tire using pliers.

Step 3: Pick a Suitable Screw

Choose a screw that is similar in size to the object you removed. Remember this will be inserted in to the tire hole. (The object held by the pliers is the screw i removed)

Step 4: Cover the Hole and Screw With Gorilla Gule

Apply Gorilla Glue to the surface of the tire. Then place screw over hole. Cover screw with Gorilla Glue.

Step 5: Torque the Screw in to the Tire

Fully insert the screw in to the tire until it becomes flush with the tire surface. Wipe off excess Gorilla Glue from tools.

Step 6: Fill Tire With Air and Reinstall It on the Automobile

Once all other steps are finished, replace tire on car and pump it full of air. It is not necessary to wait for the Gorilla Glue to dry. I performed this repair on my friends truck with great success.