Tools Wall Mount

Hello everyone

We have a small warehouse , all our small projects and repairing takes place over there

But the problem is we don't have any organized place to store the tools , they are all over the place, part of them ware mounted on this wall , and the other are somewhere else.

I decided to do some Building and solve this issue.

So i decided to build a Wall Mount

Buying Woooood

Went to a wood-house and bought a few 3.7 Meter woods

Cut It to Fit the Car

Cool saw

In the Car

The Look Before the Project

I took a snapshot of how it looks before , catastrophic

Create Back Boards As a Spacer

Putting the Boards Together

First , drill holes , make sure you mark the center points of the board

Create Custom Bolts

Make sure you measure the size of the bolt using a Caliber

Grab it with the clamps , and cut it using a saw

Between the Clamps and the Bolt i rapped it with some fabric in order to keep the screw thread complete.

* if you wont do that rapping issue , you will encounter problems when you are screwing the nut

Custom Bolts Ready

Attach Back Boards

Drill Holes in the Wall & Mount the Board

Saw the Board in Order to Fit to the Faucet Location

I Have Ordered a new Faucet , will arrive shortly ( Will update the picture )

Create a Small Board for Screwdrivers

Grab the board with claps , then start drilling

Create Another Board for All the Drillers

Same here , grab it with clamps and drill

Create Another Board for All Small Bits

Create Another Small for the Little Grinding Tools

Start Hanging the Tools

In order to hang the tools, you can use two methods .

first one , with screws , just drill them and hand on them the tools
Second one , with an iron wire ( in picture ) , cut it into small 8 cm pieces , drill a hole first and then Knock it in with a hammer.

i chose the second option due to the fact that it is less likely to crack the Board and will look better

Soldering Iron & Hot Glue Mount & Wall Plug

created two mounts, for the Soldering iron and the Hot glue..
and more over i added an external point electrical outlet ( the electrical wire goes behind the board )

Almost Done

I have ordered plenty of other useful tools , they will arrive in a few days, and then i will update the Post

Till then , i`m done

:)