Triple Single Rainbow Loom Bracelet

Triple Single Bracelet Rainbow Loom. :)

Materials

The materials that you will need are:
1 loom board
1 hook
48 pcs. of loom rubber bands (12 A colored bands , 12 B colored rubber bands , 12 C colored rubber bands and 12 D colored rubber bands)
1 C-clip or S-clip

Putting the Bands

First, you may want to make sure that the arrow is pointing away from you. Then, you will need to put the A colored bands on the left side of the loom. Go straight until you reach the end of the loom.

Putting the Bands

Next, put the B colored bands on the middle. Then, go straight until you reach the end of the loom.

Putting the Bands

You now need to put the C colored bands on the right side of the loom. Go straight until you reach the end of the loom.

Adding Triangles

Now, get your D colored bands. That you'll use for putting the triangles. Skip the first 3 pegs on the loom then start putting triangles on the second 3 pegs. The point of the triangle must be pointing at you. Put triangles until you reach the end.

Turn Your Loom Around

Turn your loom around so that the arrow is now pointing at you.

Hooking the Bands

Now grab your hook. Pull the bottom band on the left side then put it on the peg where it belongs. Do the same with the middle and right side. Continue the pattern until you reach the end.