Model Car Ipod/Mp3 Speakers

This is an instructable on how to make a model car into an ipod speaker system! It took me about forty-five minutes to make, but it probably will take you about 30 minutes. So here you go, hope you like it!

You will need:
1.  2 speakers (any kind works)
2.  any model car
3.  8mm male audio jack
4.  wires
5.  ipod, mp3, or any other music device to test it

Tools
1. hot glue
2. a solder gun
3. a screwdriver

Now you have to take the audio jack and solder that to the speakers as shown in the picture.
next test it with an ipod to make sure it works.

Make sure you choose a car with enough space for two speakers.

Each model car is different, so you might have to place the speakers in a different place then I did. Once you found a spot that works, hot glue the speakers in place. 

Make a small slit in the bottom of the car for the audio jack to come out. Then attach the bottom of the car to the shell.

Now you're done, enjoy!