Twine Tomato Holder
- All you need for this project is 3 T-Post,Twine,& a Knife It should take about 2 or 3 minutes for each Tomato Plant.
Driving & Stringing the T- Post
- 1. Get your T-Post & Driver drive all of the T-Post in a strait line & Tie a line from T-Post to T-Post.
Cutting & Tying the Twine
- 2. Cut your twine & tie a Figure 8.
Downloads
Draping & Attaching the Twine to the Tomato Plant
- .3 Drape Twine over Twine attached to T-post, then attach Figure 8 to Tomato Plant, last tie Half Hitch to Tomato Plant.