Upcycled Broken Jewelry Sculpture

by Design Time in Craft > Art

1083 Views, 7 Favorites, 0 Comments

Upcycled Broken Jewelry Sculpture

2018-10-03 00.34.51.jpg

☆ Don't throw away broken jewelry, make a work of art with it! This instructable will show you how. You can do it!☆

( use all safety gear required, and work in a well ventilated are when using super glue. Refer to safety instructions and warnings on super glue and adhere to them).

Supplies

• Already broken jewelry pieces


• Super glue gel ( I used Gorilla super glue gel formula, the gel formula doesn't drip off of the piece you're gluing).


• Jewelry pliers ( for breaking down some of the already broken jewelry down even further if wanted for your unique jewelry sculpture).


• ANSI safety glasses ( used when breaking jewelry pieces with jewelry pliers).


• Leather gloves or other safety gloves (used when breaking jewelry pieces with jewelry pliers).


• Tweezers of any kind ( you may or may not need or want to use tweezers when placing the pieces of broken jewelry with super glue on them inside the shadow box. The tweezers can be used so you don't get super glue on your hands).


• Shadow box of any kind or size you want. You can find a variety of shadow boxes online. Here are a couple of web links of the shadow boxes I have used:


https://www.amazon.com/Americanflat-8x10-Shadow-Frame-Linen/dp/B0753FBX8V/ref=mp_s_a_1_6?dchild=1&keywords=shadow+box+7+x+9&qid=1618894888&sr=8-6


And


https://www.amazon.com/Darice-Natural-Shadow-Frame-bundled/dp/B00M0HG38E/ref=mp_s_a_1_12?dchild=1&keywords=5x7+shadow+box&qid=1618896911&sprefix=5x7+sh&sr=8-12

Screenshot_20210302-211732_Autodesk SketchBook.jpg
Gather your supplies listed above.

20180820_152254.jpg
Arrange the broken pieces of jewelry on your work surface before gluing them into the shadow box. Your finished piece might turn out differently then the way you plan on arranging them.

20210302_204549_1_1.gif
20210415_142925_1_1.gif
20210417_220708_1_1.gif
If breaking down the jewelry even further use safety glasses safety gloves and jewelry pliers, failure to do so could result in injuries).

When breaking down jewelry, hold a piece of jewelry with the pliers in one hand to hold the jewelry steady and with pliers hold on to the jewelry and move the pliers back and forth until the piece breaks off. When opening a jewelry links (for example on a lone earing) hold a link with pliers in one hand on one side of the link that you intend on removing withe the end of the link facing up where the metal meets, at the point of separation and with other pliers in your other hand place on the other side of the separation point of the link. Hold the link steady with one of the pliers while you move your other hand and pliers away from you to open the link at the separation point.

20210302_141833_1_1.gif
place a small dot of super glue on a broken piece of jewelry and then place that piece of jewelry on to the inside of your shadow box with or without tweezers.

Somtimes I have accidentally glued pieces somewhere in the shadow box that was not in the intended position. In that case, I just try to make it work as I glue by adding more pieces until I am satisfied with the results.

20180921_120236-1.jpg
You're all set! Close your shadow box and display, gift or sell and show me your beautiful creations! ☆