Upcycled Surgical Eyepatch Glasses

by ilpug in Circuits > Gadgets

9502 Views, 27 Favorites, 0 Comments

Upcycled Surgical Eyepatch Glasses

GEDC0295.JPG
Hello

A few days ago my grandpa was giving me some stuff, and in the box was a bag of these old surgical eye patches he had from when he got a cataracts surgery done. I immediately grabbed them, seeing their project potential.

When I got home I tossed them on my worktable, and forgot about them. Today I was sitting around and this idea just popped into my head. It's simple, and has a great result. The eye patches are designed to limit light, so these would work as ski goggles or ambient sunglasses.


Materials

GEDC0283.JPG
GEDC0284.JPG
GEDC0289.JPG
  • Eye patches. These are Sof Guard brand, and I have no idea where you can get them just like this, the Internet turned up no suppliers. You can get other mesh ones though.
  • 3D movie glasses- Available at movies, some let you keep them, most don't. You can steal them as many do, or get them online for super cheap. I found mine on the ground. Knock the lenses out, it's easy. You should probably already have a pair, if not, bad hipster, no cred.
  • Six tiny screws. I got these from an old circuit board I eviscerated. Look at Radioshack if you have none or can't find any

Tools

GEDC0296.JPG
  • Power drill
  • eyeglass screwdrivers
  • 1/16 drill bit
  • A vise helps. If you are super careful you can hold the pieces together and drill, but watch your fingers.
  • Hands
  • You can use a knife to scratch the brand name off the glasses if you want, I was too lazy to.

Tear the Eyes Out

GEDC0286.JPG
Tear the rubber rims off the eye patches. This is easy, it just pops off. Toss the rubber unless you have an application for it, they are neat shapes.

If you haven't already, pop the lenses of the 3D glasses out, pushing with your thumbs works well.

Clamp

GEDC0290.JPG
Clamp the patch lenses onto the glasses, as shown, and figure out which holes you want to drill though.

Drill and Screw

GEDC0293.JPG
GEDC0294.JPG
Drill holes through the glasses frames at the points that match up with the chosen holes in the mesh lenses. Stick the screws through and tighten them. Effectively, you are done.

Clean Them Up

GEDC0295.JPG
I gave the "lenses" a good scrub to make them shine better. At this point, feel free to paint or other wise decorate your glasses.

Style!

GEDC0300.JPG
Show off your new glasses. They look a bit steam/cyber punk, and can be worn comfortably.


Any questions?