Venom Snake Automaton: [ 11. LEFT CAMS ASSEMBLY (G10) ]

by Soludus in Workshop > 3D Printing

200 Views, 0 Favorites, 0 Comments

Venom Snake Automaton: [ 11. LEFT CAMS ASSEMBLY (G10) ]

SoludusBanner2000x500.png
<< 10. RIGHT SCISSORS ASSEMBLY (G9)
0. CONTENTS
>> 12. LEFT RAILS ASSEMBLY (G11)

G10 Parts

A0_G10.png

G10 Assembly (Part 1)

A0_G10_1Mix.png
A0_G10_2.png
A0_G10_2Mix.png
A0_G10_3.png

G10 Assembly (Part 2)

A0_G10_4.png
A0_G10_4Mix.png
A0_G10_5.png

G10 Assembly (Part 3)

A0_G10_6Mix.png
A0_G10_6a.png
A0_G10_7Mix.png
A0_G10_7a.png

Painting Guide

A0_G10_Pnt1.png
A0_G10_Pnt2.png

G10 Assembly (Part 4)

A0_G10_10Mix.png
A0_G10_11Mix.png
A0_G10_11aMix.png
A0_G10_12.png

WARNING: Be careful when turning the crank, it may get stuck because it is not fully constrained yet. If it gets stuck don't force it, align the misaligned parts, turn the crank ΒΌ of rotation the opposite direction, and try again.

<< 10. RIGHT SCISSORS ASSEMBLY (G9)
0. CONTENTS
>> 12. LEFT RAILS ASSEMBLY (G11)