Venom Snake Automaton: [ 12. LEFT RAILS ASSEMBLY (G11) ]

by Soludus in Workshop > 3D Printing

218 Views, 0 Favorites, 0 Comments

Venom Snake Automaton: [ 12. LEFT RAILS ASSEMBLY (G11) ]

SoludusBanner2000x500.png
<< 11. LEFT CAMS ASSEMBLY (G10)
0. CONTENTS
>> 13. LEFT SCISSORS ASSEMBLY (G12)

G11 Parts

A0_G11.png

G11 Assembly (Part 1)

A0_G11_1Mix.png
A0_G11_2Mix.png
A0_G11_3.png
A0_G11_4.png

G11 Assembly (Part 2)

A0_G11_5.png
A0_G11_6.png
A0_G11_6a.png
A0_G11_7.png

G11 Assembly (Part 3)

A0_G11_8.png
A0_G11_9.png
A0_G11_10.png
A0_G11_11.png

G11 Assembly (Part 4)

A0_G11_12Mix.png
A0_G11_12a.png
A0_G11_13.png

Painting Guide

A0_G11_Pnt1.png
A0_G11_Pnt2.png

G11 Assembly (Part 5)

A0_G11_14Mix.png
A0_G11_15Mix.png
A0_G11_16Mix.png

WARNING: Be careful when turning the crank, it may get stuck because it is not fully constrained yet. If it gets stuck don't force it, align the misaligned parts, turn the crank ΒΌ of rotation the opposite direction, and try again.

<< 11. LEFT CAMS ASSEMBLY (G10)
0. CONTENTS
>> 13. LEFT SCISSORS ASSEMBLY (G12)