Venom Snake Automaton: [ 13. LEFT SCISSORS ASSEMBLY (G12) ]

by Soludus in Workshop > 3D Printing

185 Views, 0 Favorites, 0 Comments

Venom Snake Automaton: [ 13. LEFT SCISSORS ASSEMBLY (G12) ]

SoludusBanner2000x500.png
<< 12. LEFT RAILS ASSEMBLY (G11)
0. CONTENTS
>> 14. FRONT CAMS ASSEMBLY (G13)

G12 Parts

A0_G12.png

G12 Assembly (Part 1)

A0_G12_1.png
A0_G12_1Mix.png
A0_G12_2.png

G12 Assembly (Part 2)

A0_G12_3.png
A0_G12_3a.png
A0_G12_4.png
A0_G12_4a.png

Painting Guide

A0_G12_Pnt1.png
A0_G12_Pnt2.png

G12 Assembly (Part 3)

A0_G12_5Mix.png
A0_G12_6Mix.png
A0_G12_6a.png

WARNING: Be careful when turning the crank, it may get stuck because it is not fully constrained yet. If it gets stuck don't force it, align the misaligned parts, turn the crank ΒΌ of rotation the opposite direction, and try again.

G12 Assembly (Part 4)

A0_G12_7.png
A0_G12_7a.png
A0_G12_8Mix.png
A0_G12_8a.png

G12 Assembly (Part 5)

A0_G12_9.png
A0_G12_9a.png
A0_G12_10Mix.png
A0_G12_10a.png

G12 Assembly (Part 6)

A0_G12_11.png
A0_G12_12Mix.png
A0_G12_13Mix.png
A0_G12_14Mix.png

WARNING: Be careful when turning the crank, it may get stuck because it is not fully constrained yet.

G12 Assembly (Part 7)

A0_G12_15Mix.png
A0_G12_16Mix.png
A0_G12_17Mix.png
<< 12. LEFT RAILS ASSEMBLY (G11)
0. CONTENTS
>> 14. FRONT CAMS ASSEMBLY (G13)