Venom Snake Automaton: [ 16. FEET, PLATFORM, AND BASE ASSEMBLY (G15 AND G16) ]

by Soludus in Workshop > 3D Printing

249 Views, 1 Favorites, 0 Comments

Venom Snake Automaton: [ 16. FEET, PLATFORM, AND BASE ASSEMBLY (G15 AND G16) ]

SoludusBanner2000x500.png
<< 15. FRONT MECHANICS ASSEMBLY (G14)
0. CONTENTS

G15 Parts

A0_G15.png

G15 Assembly (Part 1)

A0_G15_1.png
A0_G15_1Mix.png
A0_G15_2.png

G15 Assembly (Part 2)

A0_G15_3.png
A0_G15_3Mix.png
A0_G15_4Mix.png

G15 Assembly (Part 3)

A0_G15_5.png
A0_G15_5Mix.png
A0_G15_6.png

G15 Assembly (Part 4)

A0_G15_7Mix.png
A0_G15_8Mix.png

G15 Painting Guide

A0_G15_Pnt1.png
A0_G15_Pnt2.png

TIP: Use varnish to protect the paint of the platform and the boot's outsole.

G15 Assembly (Part 5)

A0_G15_9Mix.png
A0_G15_10Mix.png
A0_G15_11Mix.png
A0_G15_11aMix.png

WARNING: Be careful when turning the crank, it may get stuck because it is not fully constrained yet. If it gets stuck don't force it, align the misaligned parts, turn the crank ΒΌ of rotation the opposite direction, and try again.

G15 Assembly (Part 6)

A0_G15_12Mix.png
A0_G15_12a.png

G16 Parts

A0_G16.png

G16 Assembly (Part 1)

A0_G16_1.png
A0_G16_1a.png
A0_G16_2Mix.png

G16 Painting Guide

A0_G16_Pnt.png

TIP: Use varnish to protect the paint of the base.

G16 Assembly (Part 2)

A0_G16_3Mix.png

Please, use the base to hold the automaton while turning the crank.

Support me on Patreon so I can design more: www.patreon.com/soludus

Software used for the creation of the automaton:

  • Blender
  • Daz Studio
  • Fusion 360

Software used for the instructable:

  • Gimp
  • Google Docs
  • Grammarly
  • Inkscape
<< 15. FRONT MECHANICS ASSEMBLY (G14)
0. CONTENTS