Venom Snake Automaton: [ 9. RIGHT RAILS ASSEMBLY (G8) ]

by Soludus in Workshop > 3D Printing

246 Views, 0 Favorites, 0 Comments

Venom Snake Automaton: [ 9. RIGHT RAILS ASSEMBLY (G8) ]

SoludusBanner2000x500.png
<< 8. RIGHT CAMS ASSEMBLY (G7)
0. CONTENTS
>> 10. RIGHT SCISSORS ASSEMBLY (G9)

G8 Parts

A0_G8.png

G8 Assembly (Part 1)

A0_G8_1Mix.png
A0_G8_2.png
A0_G8_3.png
A0_G8_3a.png

G8 Assembly (Part 2)

A0_G8_4.png
A0_G8_5.png
A0_G8_6.png

G8 Assembly (Part 3)

A0_G8_7Mix.png
A0_G8_8Mix.png
A0_G8_8a.png
A0_G8_9.png

G8 Assembly (Part 4)

A0_G8_10.png
A0_G8_10a.png

G8 Assembly (Part 5)

A0_G8_11.png
A0_G8_12.png
A0_G8_13.png

Painting Guide

A0_G8_Pnt2.png
A0_G8_Pnt1.png

G8 Assembly (Part 6)

A0_G8_14Mix.png
A0_G8_15Mix.png
A0_G8_16Mix.png

WARNING: Be careful when turning the crank, it may get stuck because it is not fully constrained yet. If it gets stuck don't force it, align the misaligned parts, turn the crank ΒΌ of rotation the opposite direction, and try again.

<< 8. RIGHT CAMS ASSEMBLY (G7)
0. CONTENTS
>> 10. RIGHT SCISSORS ASSEMBLY (G9)