Vintage Saw Blade Knife With Leather Sheath

This knife was made from a vintage saw blade which was left by my grandpa, and I used a grinder for the shape of this saw blade. It can be a EDC knife.

The 1st step is cut the shape of the knife, I used a grinder for this step, because was too dirty so I didn't take photos. then sharpen the knife on stones.

the handles were made from rosewood, because the wood were not wide enough, so I glued 2pieces into 1. and then glue the 2 pieces of handles with epoxy glue on the knife. Use files and sandpapers No.180 to 5000 make the surface smooth. The knife is finished but need a sheath..

draw the shape on the paper, then cut a piece of cowhide of that shape

I have to sew the loop first, that it can be put on the belt.

still use saddle sewing to finish it. after all finished, apply some bee wax on the edge, then friction with a stick.

thanks for watching, if you have problems and suggestions please leave comments below