Water Bottle Lamp Attachment
In this instructable I will show you how to make a lamp out of a recycled water bottle.
Supplies and Tools You Will Need
Supplies:
- Water Bottle
- Flashlight
- Cardboard
- String
Tools:
- Scissors
- Box Cutter
- Hot Glue Gun and Hot Glue
Wrap Cardboard Around a Flashlight
- Wrap cardboard around your flashlight
- Hot glue the cardboard around the flashlight
- Cut the extra off with a box cutter
Wrap Cardboard Around Water Bottle Cap
- Wrap cardboard around the water bottle cap
- Hot glue the cardboard to the water bottle cap
- Cut off the extra cardboard with your box cutters
Glue the Flashlight and Bottle Cap Together
- Hot glue the cardboard covered water bottle cap to the inside of the cardboard covering the flashlight
Attach the Piece of String
- Wrap cardboard around the bottom of the outside of the cardboard covered flashlight
- Poke two holes on opposite sides of the newly attached cardboard
- Run string through both holes
- Tie knots on each end
- Cut off the extra string with scissors
Screw Onto a Full Water Bottle
- Screw it onto a full water bottle just like you would a normal bottle cap.
Now Hang It Up!
- Hang it up anywhere you can!