Rainbow Loom Triangle Bracelet

by grooticorn in Living > Education

478 Views, 5 Favorites, 0 Comments

Rainbow Loom Triangle Bracelet

13, 11:23 AM.jpg
Please like and follow!!! Not all of the pictures are mine but some are. PLEASE GIVE HONEST FEEDBACK SO I CAN FIX ANY MISTAKES!

Materials

13, 11:23 AM.jpg
13, 11:23 AM.jpg
You will need:
A rainbow loom
Rainbow bands
A hook
A clip

Placing the Rainbow Bands

13, 11:23 AM.jpg
13, 11:23 AM.jpg
First, take your loom and make sure the arrow is pointing AWAY from you. Next, place a rubber band from the last middle peg forward.

13, 11:23 AM.jpg
Now, place a rubber band from the last middle peg diagonally to the last right peg.

13, 11:23 AM.jpg
Now, place a rubber band from the last rubber band you placed to the middle diagonally

13, 11:23 AM.jpg
Then, place a rubber band from the last rubber band you placed forward.

13, 11:23 AM.jpg
13, 11:23 AM.jpg
Now, place a rubber band from the bottom of the last rubber band you placed to the left diagonally. Then place a rubber band from the rubber band you JUST placed to the middle diagonally.

13, 11:23 AM.jpg
Repeat steps 2-6 until you reach the top.

Cap Band

13, 11:23 AM.jpg
13, 11:23 AM.jpg
13, 11:23 AM.jpg
13, 11:23 AM.jpg
13, 11:23 AM.jpg
Now place a cap band on the top middle peg. To form a cap band, take a rubber band and twist it to form a figure 8. Then, place the two holes from the 8 together to form a doubled o.

Looping the Rubber Bands!

13, 11:23 AM.jpg
Now, turn the loom so that the arrow is now pointing at you!

13, 11:23 AM.jpg
13, 11:23 AM.jpg
13, 11:23 AM.jpg
Place your hook in the cap band and pull back. Then, grab the top band and loop it to the right diagonally.

13, 11:23 AM.jpg
13, 11:23 AM.jpg
Now place your hook in the rubber band you just hooked. Pull back and grab the rubber band and loop it to the middle diagonally

13, 11:23 AM.jpg
13, 11:23 AM.jpg
Now put your hook back in the cap band and grab the rubber band. Then loop the rubber band forward.

13, 11:23 AM.jpg
13, 11:23 AM.jpg
Now place your hook through the looped bands and loop the top rubber band to the left diagonally

13, 12:56 PM.jpg
Now place the hook in the looped band and hook the rubber band to the middle diagonally

13, 12:56 PM.jpg
13, 12:56 PM.jpg
Then place your hook in the looped rubber bandS and loop the rubber band forward

13, 12:56 PM.jpg
Repeat steps 10-15 until you reach the top of the loom! :D

13, 12:56 PM.jpg
Now place your hook in the top looped bands

13, 12:56 PM.jpg
13, 12:56 PM.jpg
13, 12:56 PM.jpg
Now place a rubber band on the hook while the hook is still in the looped rubber bands. Then pull the hook so that the rubber band is half in the looped bands and half out. Place both ends of the rubber band on the hook

13, 12:56 PM.jpg
Next, pull the rubber bands off the loom and add an extension(if you want to see how to add an extension please comment). Then YOU ARE DONE! PLEASE FOLLOW AND LIKE!!!