Windmill With Strawbees

List of parts:

Base

9 black straws

3 white straws

7 strawbees

Fan

One white straw

2 white straws cut (1 inches in length)

7 strawbees

Take 3 black straws and connect with the tri-key strawbeees

For the end of each black straw, attach another black straw with a strawbee

Take 3 white straws and cut the bendy part of bendy straw off.

Take one of the white straws. Attach it from one strawbee to another strawbee that is holding the black straws together. Repeat with all two white straws until a triangle forms.

At end of white straw, attach a strawbee to keep it from slipping

At the very end of each black straw, attach a five-arm strawbee.

Attach a black straw to the five-arm strawbee. Then attach the opposite end to the end of a five-arm strawbee (already attached to a black straw)

Repeat with other two black straws until a triangle base forms

Cut ¼ of a black straw off. Repeat with two other straws.

Take a tri-strawbee and connect the black straws to form three arms

Place this in the center of the white triangle (stabilizer)

Insert a black straw into the center of tri-strawbeee

Take a black straw and insert into the top of tri-strawbee

Take the end of this black straw into the other black straw in the center of the base

At the very top of the black straw, attach a bendy part of a white straw (that was previously cut) and attach a strawbee. Then attach another five-arm strawbee.

Take 2 white straws and cut them into 1 inch pieces. Take the one inch pieces and attach to the five-arm strawbee. Then add post its and fold into triangle to form the fans.