Wood Spool - Bobbin - REEL

wooden spool - Bobbin - reel

you will need some scrap plywood or solid wood

you will need

the tools show 2" and 3 ½ " and a glue gun as shown

use the 2" just to go

½ way throw the material you are using solid wood or play wood

then use the larger cutter to cut it out as shown in solid wood and play wood

start gluing

apply hot glue to the

inner wood cavity then press firmly the empty can in cavity

(note) you can also use 2 part epoxy that will be much stronger too on this project

SAND THE EDGES

sand edge just so there is no splinters
- I routed the solid wood one but sanding will do the job

just as good 100 grit or 120 grit is fine

OPTIONAL IF YOU HAVE A ROUTER

I USED A ROUTER ON THE WOODEN SPOOL SHOWN IT DID A REAL PRO -JOB

a good clear coat will look nice or wood stain or any color you wish to use

ENJOY YOU SPOOLS - BOBBINS -- REELS