Wristwatch Phone Charger

Don't you hate it when your phone dies but, you need to use it? And then you go and sit by a socket for 30 mins using you ANCHORED phone, well here is the solution. Its a bracelet that charges your phone via 9 Volt battery a little finesse.

You will need...
Car to USB
Nine Volt
Switch
Extra Wire
Hot Glue
Nine Volt Clip and Connector

*Optional*
If you are making Bracelet...
Paracord
Lighter
Craft Buckle

Start off by Gluing the Circuit board onto the back of the 9 Volt clip.
And Finish by gluing on top the Switch.

Attach the Wires to the 9 volt connector, Switch, and charger board.
Next insulate and glue down with hot glue.

Cut two pieces of paracord that are twice the circumference of you wrist.
Melt and glue the ends together as shown in the picture.

Glue an eight foot piece of paracord to one of the buckles and weave in and out.
When you are done melt onto the other buckle.

Glue the Electronics onto the Bracelet and secure with Paracord.