Xbox One Elite Wobbly Thumb Stick Fix

by Logixal in Circuits > Microsoft

64961 Views, 17 Favorites, 0 Comments

Xbox One Elite Wobbly Thumb Stick Fix

11a17be2-d9e0-46f4-a0ff-6cfd5ef06af6.jpg

do you have a xbox elite controller with a wobbly thumb stick?

mine started to get loose and wobbled around.

this tutorial will help fix it.

this has held up for at-least 4 months now and i haven't had to replace it again.

Next step: Tools needed.

Tools Needed

IMG_6615.JPG

Tools needed:

Torx bit: T8

Blue painters tape

X-acto knife ( to precisely cut the painters tape)

scissors would work

Remove Sticker & Screw

584e0084e02ad615420002c5.jpeg

Remove battery & peel back the sticker

Remove the T8 screw

Remove Controller Back

584e015d8ae43b064c0007ef.jpeg
584e01617a9cb689ff0000bd.jpeg

Remove the grips

depress the trigger and wedge your finger as shown in the picture

gently pull away from the controller and it should snap apart.

it might feel stuck but thats because there is some tape holding it down.

Remove Screws

IMG_6618.JPG
IMG_6619.JPG

remove the 4 T8 screws and the front cover should come apart with out any problem.

Reinforce Thumbstick

IMG_6620.JPG
584e031d8ae43b33e6000064.jpeg
IMG_6622.JPG

gently pull the thumbstick base off.

it should just slide straight up.

cut a piece of painters tape as shown.

it should be long enough to wrap the post atleast one time tried to not have it overlap to much.

if its too thick the thumbstick base wont slide back down in place

see the picture for a reference.

once the base is back on just reassemble the controller in reverse and there ya go!!

good luck! any questions either post them here or email me at wldfr1985@gmail.com