Yoda Head

- I created this model in a software3d, then exported in STL for 3d printing.

Modeling in a 3d software.

The ears are oriented upwards, diagonally. In this way, they will be supported by the head when printing3d.

No support required

-Printed with dagoma discovery 200 with these parameters:

x:120.57mm
y:73.48mm

z:92.52mm

-Thickness layer: 0.15mm -

-Filling: filled

-Filament:PLA Gizmo Docks

-Température:205°

-time: 5h11min

Free STL:

https://moon-station.mechamoon.com/index.php/produit/yoda2-versions/

3d printing By francois_morel and Metall .

A second version. The ears of the model are larger, and requires support for printing.

3dprinted by laurent_morat and Peter Greňo