Zatn'kitel (Stargate)

by harpuia in Living > LEGO & K'NEX

3864 Views, 6 Favorites, 0 Comments

Zatn'kitel (Stargate)

IMG_3358.JPG
IMG_3359.JPG
IMG_3360.JPG
IMG_3361.JPG
IMG_3362.JPG
IMG_3363.JPG
Zatn'kitel 3.jpeg
Zatn'kitel 2.jpg
Zat'n'kitel.jpeg
IMG_7514.JPG
This weapon from Stargate the show was the main stunning weapon used by the SGC and Goa'uld (bad guys).
One shot stuns, two shots kill, three shots could vaporize.
This gun has a safety mode and ready mode.
This K'nex version can change modes.
Down position is safety mode and up position is ready mode.
It is rather easy to make if you know what you're doing.

This was rather hard to get to spring up and stay because of the weight, I then tried using the chain piece than ended up working.

I hope every one enjoys this as my first posted Instructable.

The Pieces to Make the Zatn'kitel

IMG_7496.JPG
IMG_7497.JPG
IMG_7498.JPG
IMG_7499.JPG
IMG_7500.JPG
these are all of the parts of the Zat gun.

Pieces to make it:
-18 green rods
-8 white rods
-8 blue rods
-10 red rods
-2 grey rods
-3 grey connectors
-5 tan connectors
-4 light grey connectors
-17 red connectors
-12 green connectors
-2 yellow connectors
-1 orange connector
-11 white connectors
-8 pairs socket connectors
-1 black grip connector
-3 blue/green hinge connectors
-12 chain pieces

Putting It Together

IMG_7521.JPG
IMG_7520.JPG
IMG_7519.JPG
IMG_7518.JPG
IMG_7517.JPG
IMG_7516.JPG
IMG_7514.JPG
IMG_7515.JPG
here are the instructions to take the pieces and put it together.
-first you take the top section and add the detail parts.
-then you attach the middle section.
-then you put on the chain.
-then you attach the bottom section on with the back detail piece.