A Cheap and Beautiful Rc Car
by RiteshYadav in Circuits > Electronics
705 Views, 1 Favorites, 0 Comments
A Cheap and Beautiful Rc Car
The car is cheap and made of materials available nearby.
If u have any problem then u can ask me .
Leave a nice comment.
If u have any problem then u can ask me .
Leave a nice comment.
Material Required
Cardboard
Sticks
DVD drive (broken, not new but the motors are OK)
Transmiitor and receiver
LEDs
Gear box of a good ratio for better toque
I big gear
Tyres
I hollow tube
Fevicol , feviquick, papers
Colours and simple tools
Sticks
DVD drive (broken, not new but the motors are OK)
Transmiitor and receiver
LEDs
Gear box of a good ratio for better toque
I big gear
Tyres
I hollow tube
Fevicol , feviquick, papers
Colours and simple tools
Making Frame
Make a wooden frame out of sticks and make sure that the wood is not heavy.
Our moto is to make light frame.
From the DVD drive take out a motor which is without gears and place it in the gear box .
I made my gear box at home using some plastic parts and gears. Officially I did not do any calculations for gears but use my hands to understand them.
Our moto is to make light frame.
From the DVD drive take out a motor which is without gears and place it in the gear box .
I made my gear box at home using some plastic parts and gears. Officially I did not do any calculations for gears but use my hands to understand them.
Body
The body is made of card board and attached with frame.
Stearing
The strstearing is made of DVD drive and the bigger gear I attached a metal peice in the center and attached a refill to it . I attached two tyres to the refill and make sure it runs free.
Back Power
Attach the other gear box and motor to the back of vehicle . attach wheels to it
Power
Wide up the reciver to the motors . it is very easy so I am leaving it.
Colour
Colour the car as you wish and run it.
You can also use LEDs .
You can also use LEDs .