Bamboo Wine Holder

by sakwijaya in Workshop > Woodworking

4854 Views, 130 Favorites, 0 Comments

Bamboo Wine Holder

IMG_7272.JPG

lets make bamboo wine holder without glue

Tools and Material

IMG_7246.jpg

Tools :

- saw

- axe

- sandpaper

- carver

- brush

- glasses

- Furnish

- hammer

Materials :

-bamboo

Making Main Body Holder

a1.jpg
IMG_7164.jpg
IMG_7093.jpg
IMG_7010.jpg

the making of main body holder (wine body holder)

main body holder size :

30 cm x 12 cm

use sandpaper cc320cw for the tube to smoothen main body holder surface

and follow the bamboo fiber for the best surface.

Making Sub Body Holder

a2.jpg
IMG_7164.jpg
IMG_7091.jpg
IMG_7010.jpg
IMG_7105.jpg

(wine bottle opener) sub body holder :

25 cm x 10 cm

use sandpaper cc320cw for the tube to smoothen sub body holder surface

and follow the bamboo fiber for the best surface.

Body Holder Hole (Wine Holder)

a5.jpg
IMG_7039.jpg
IMG_7097.jpg
IMG_7203.jpg

Body Holder for wine stand

Create two 3 cm diameter holes, length 5 cm or more (adapted),

measuring at 2 cm from each end of the tube,

chisel to make a hole,

and use sandpaper (follow the bamboo fiber for the best surface) cc320cw for smoothen the main body holder hole.

.

Wine Handle

a3.jpg
IMG_7039.jpg
IMG_7096.jpg
IMG_7048.jpg
IMG_7074.JPG
4.jpg
b1.JPG

for wine handle

Create two 3 cm diameter bamboo , cut half of the bamboo

and use sandpaper (follow the bamboo fiber for the best surface) cc320cw for smoothen the wine handle.

Sub Body Holder Hole

IMG_7163.jpg
IMG_7165.jpg
IMG_7205.jpg

Sub Body Holder (wine opener)

Create two 1 cm diameter holes,

measuring at 8 cm from each end of the tube,

chisel to make a hole,

and use sandpaper (follow the bamboo fiber for the best surface) cc320cw for smoothen the sub main body holder hole.

Wine Opener Handle

a4.jpg
IMG_7036.jpg
IMG_7049.jpg
IMG_7096.jpg
IMG_7075.JPG
5.jpg
8.jpg

for wine opener handle

Create two 1 cm diameter bamboo , cut half of the bamboo

and use sandpaper (follow the bamboo fiber for the best surface) cc320cw for smoothen the wine opener handle.

Wine Holder Rest

IMG_7039.jpg
IMG_7135.jpg
IMG_7096.jpg
IMG_7048.jpg
IMG_7073.JPG
3.jpg
7.jpg

Wine Holder Rest

Cut a ring of bamboo with 3cm thickness.

Cut the bamboo ring into 2 equal semi circle parts,

sandpaper (cc320cw, follow the bamboo fiber for the best surface) the tube to smoothen its surface,

Sandpaper the whole surface of the tube to make as round as possible.

Finishing

IMG_7220.jpg
IMG_7223.jpg
IMG_7224.jpg
IMG_7103.jpg
IMG_7252.JPG
IMG_7257.JPG
IMG_7254.JPG

Finishing

Furnish the outer layer of the tube till it shines,

Wait for 30 minutes till it dries,

After drying, sandpaper (1000cc, follow the bamboo fiber for the best surface) the tube (inside and outside surface) to smoothen the all the bamboo surface.

or you can only use heatgun for finishing without furnish.

Finish!!

IMG_7272.JPG
IMG_7273.JPG
IMG_7274.JPG

bamboo wine holder