Beginner Robot

All of the partially no programming robot's i saw required spdt switches that can get easily activated, but i did not have that luxury.So I made a simple and easy to make partially autonomous robot.

2x Bo motors about 150 rpm.(the fit and provide a good power to weight ratio).

2x Wheels (depends on your motors)

1x small box when i mean small i mean those acrylic paint boxes

9v battery (9v powerpack not a six aa size battery holder.

2x crocodile clips

make a hole using a divider or a knife just donot cut yourself like i did.

Use double sided tape to mount the motors or use screws .

Screw your wire onto the croc clip .

place the battery in between the gap between the Bo's (motors).

connect terminals you need not think polarity. just try to make it lean back.