Blowgun Darts

how to make a blowgun dart

you will need a piece of bamboo as big around as a drinking straw
make sure the bamboo has a hole in the middle of it then cut the bamboo about 1 and a half inches long then cut a slice about a half
of a inch long down the back of it...

you need to get some yarn for the balance and cut 5 pieces 1 inch long you will slid them in the crack shown in the last step...

get a nail and cut it with some pliars or use a saw make sure you cut the nail about a inch long and stick the dull part in the bamboo hole on the other side of the bamboo shown in last step

now u have adart please be carefull and have fun!!!!!!!!!!