Bolt Shooting Mod for Tru-mark Sling Shots Plus Bolts
by corey_caffeine in Outside > Launchers
15192 Views, 7 Favorites, 0 Comments
Bolt Shooting Mod for Tru-mark Sling Shots Plus Bolts
this instructable will show you how to make a special sling shot band for shooting specialized bolts (aka arrows) from a slingshot
What You Need
you will need:
1x tru-mark slingshot
1 pair of scissors
1piece of round wire (i used my late ds's charging cable)
1x tru-mark slingshot
1 pair of scissors
1piece of round wire (i used my late ds's charging cable)
Remove the Pouch
pretty self explanatory cut the two loops holding the pouch to the band
Cut Wire
also self explanatory
Thread Wire Through Holes
just jam it on through there
Tie
tie the wire as shown in pic
Find a Target
to make things to shoot just clip a wire hanger into a few short pieces and fire.
Supplies for Bolts
you will need:
1x roll of electrical tape
1x hacksaw
1x pliers
1piece of coat hanger wire bent into a v
1 pair of scissors
and 1 bamboo garden stake
1x roll of electrical tape
1x hacksaw
1x pliers
1piece of coat hanger wire bent into a v
1 pair of scissors
and 1 bamboo garden stake
Cut the Stake
cut off a piece approximately 8 inches from the stake
Put It Together
stick one leg of the v shaped coat hanger wire into the stake piece
Bend
bend the outer piece of wire as shown
Bind
wrap the part thats parallel to the stake with electrical tape as shown
Admire
admire your work