Cane

How to make a cane with just a few things. reuse fallen branches to make a display cane, instead of burning it and sending the smoke into the air.

Materials:
Saw
Knife
wood burning tool
Sandpaper
stain
screw
clear wire
fallen branch

find a good size branch in the woods or in your backyard that has fallen. Cut to the size you need, with the saw.

After you cut the branch to the size you want then you can cut off the other smaller branches on it (but leave a little stud on it, to look more natural). Do not get a branch that is straight you want to make sure that it is curved. And remove the bark with the knife.

Now you can carve the grips into it using the knife. Use a pencil trace your fingers on to the cane. then cut the fingers out like a " U "

use sand paper to sand the cane. use 80 grit and 120 grit.

Then you can put your design on the cane.

Add the stain to the cane.

Now if you want to showcase your work, take some clear wire or what ever you have, tie both ends to a screw and drive the screw into the stud on the wall.