Cleaning Longboard Bearings

you wil need:

- aceton
- cleaning kit
- grease
- dirty bearings
- rags

taken out the rubber ore steel protective cap of by using a needle ore paperclip.

put the bearings on the rod with a spacer between every bearing and put the screw on the end (make Sure the steel balls Are facing upwards).
fill the bottle 1/3th

put the lid on top and shake for 30 seconds.
refresh the aceton en repeat until the aceton comes out clean.

dry your bearings and If you want use compressed air to blow out any residue.
put two drips of oil on the steel balls and give it a spin.

put the caps back on and your doen!