Cornhole

my cornhole boards

I used 3/4 in plywood

cut the ply wood at 2ft for the width and the length was 42in

I used 2/4 for the frame

cut 4 2ft pieces for the width of each board

then I cut the length of the support boards at 39in

glue and screw the 2ft board and the 39in boards to the plywood

there were cracks and some holes in my board so I used wood filler to fill them in

let that dry for a day or so then sand it down and if there's still holes keep filling them so its flat and smooth and then do another sanding job so its completely smooth

I used a fly cutter to drill my 6in hole

take a drill and measure the diameter and then find the radius of the hole to put the drill to drill the hole

we kept cutting and measured till we found out the right height

the boards need to sit a foot off of the ground so u have to had the angle into the equation so it will sit level on the ground

that is what the finishing product should look like but I painted mine but you can doc whatever you want with them