Crazy Lid Holder

by StephanP1 in Workshop > Woodworking

4702 Views, 112 Favorites, 0 Comments

Crazy Lid Holder

⚔ Crazy Lid Holder - This is my entry for "Kitchen utensil build challenge 2015"

You can build this little project in just one hour

Cut Two Boards to the Same Dimensions

a sägen.png

How big or how small doesn't matter

Drill a Hole in Each Board

b bohren.png

The hole should be bigger then the thickness of the board

Make a First Cut With the Table Saw

c einschneiden.png

Just cut only up to the hole

Make a Second Cut

d noch mal einschneiden.png

Be carefull

Round the Edges With a Router

e kanten brechen.png

If you don't have a router, you can also use sandpaper.

Sanding

f schleifen.png

sanding, sanding .....

Finishing With Linseed Oil

g ölen.png

if you don't like a finish, you don't need one

Then You Have 2 Boards With an Egg Holder But...

h schneidbrett.png

for breakfast or cooking

Also an Lid Holder for Big Lids And

i deckel growss.png

like this one

A Lid Holder for Small Lids And

j deckel klein.png

like this one

A Lid Holder Fore Huge Lids

k deckel glas.png

like this one.