Fast Robot That Can Carry Five Lbs
by lollies in Circuits > Robots
528 Views, 9 Favorites, 0 Comments
Fast Robot That Can Carry Five Lbs
this is what it should look like at the beginning
Our Initial and the Changes
Materials Needed
flat the top
add one more wheel
two more 60 gears
4 kept nuts
4 spacers
4 flat bearing
8 allen screw
battery holder
4 collers
hex rench
2 open ended rench
2 shafts
After You Add All That.
it should look like this
Sled
make a sled
you will need a
13 keps locks
13 screws 3/8
a 5 hole angle bar
a 9 hole angle bar
4 bearing blocks
Your Sled
you should have someinght that looks like this
it can carry 5-7 lbs
This Is How It Should Run
Downloads
Downloads
Why We Chose It
We chose this design because it seemed easy to do with he materials we were given. all we had to do was flatten the top and replace a few things.
Robot Info
the in put is 115.8
the output is 0.33
torque is also 0.33
the gear ratio is 5:1 and 1:1
there is no theoretical speed
nor actual speed
End
