Flint Knaping Tools

In this instructables i will show you how to make a pressure flaker

What you will need. A drill a dowel a nail and super glue. You will also need some form of a tool to cut steel.

ok so you will want to cut you dowel to just a little smaller then you nail for your handle.

then you will drill a hole as close to the middle as you can. ok the handle is done.

now onto making the nail ready for the handle.

ok so take your cutting tool of chose and take off the head of the nail.

now for the tip take a file and round it out.

(NOTE: a bench vise is optional.)

ok put the end of the nail into the dowel and pound on the end of it to get a nice fit.

take the super glue and put some on the nail and wood.

now! its done! so go make your self a arrow head!

not liable to any injures sustained during or after this project.