Home Made Pinball Machine
by justindouthat in Living > Toys & Games
15974 Views, 19 Favorites, 0 Comments
Home Made Pinball Machine
To make a pinball machine you will need a thick peice of rectangular�ply wood , a small 2x4,�lots of rubber bands,lots of nails,duct tape,2 bolts,a marble,and a pipe not much bigger than your marble.
Making the Walls
For the walls you will need to place the nails in the wood to streach the rubber bands between.
Making the Hitters
For the hitters you will need to take your bolt and cover it in duct tape,them put a nail between the boalt and the other nail so that it can move freeley.
Puting the Rubber Bands on the Hitters
next you will need to wrap a rubber band around the rear or the hitter,then run it to the bottam of the board and wrap it around a nail.
next take your pipe and a pice of 2x4 and tape it down to make the starter.
last take your 2x4 and nail it to the boatom of the board to make a slant [you can add more wood to the bottom to make the game harder]