How to Make a Cool Cross Bow
by survivor dude in Outside > Launchers
22236 Views, 66 Favorites, 0 Comments
How to Make a Cool Cross Bow
I'll show you how to make the most strongest weapon even if its made out of simple things.
Step 1
Materials
A bag clipper
A lot of popsickle sticks
duct tape
A last one or two rubber bands(depending on size)
A bag clipper
A lot of popsickle sticks
duct tape
A last one or two rubber bands(depending on size)
Step 2
take two popsickle sticks and tape them together. And tape one popsickle stick to the other two you taped together, so there is a over hang.
Step 3
If you did things right on the first step this is how it will turn out.
Step 4
Do step 1 again and tape the two togeather with the same over hang.
Step 5
Now do step 1 one more time so it looks like this.
Step 6
Tape two popsickle sticks together as shown.
Step 7
Tape the two popsickle sticks to the tip of the long stick you made earlyer.
Step 8
Tape two popsickle sticks on each side to add support for the two sticks.
Step 9
Take two popsickle sticks and tape them on in a curved way so it looks like the picture.
Step 10
At the end of each stick you taped on, cut knoches so the rubber band can hang onto something.
Step 11
Take the bag clipper and tape to the other end, this will be the trigger.
Step 12
It's time to make the guide for the arrow. Take some popsickle sticks and make three sets of what is shown below.
Step 13
Make a box shape guide shown on the bottom picture. This will keep the arrow more straight.
Step 14
Tie on the rubber band and make sure it is tight but not to tight or else it will break.It's alomost done.
Step 15
Take five popsickle sticks and use three to make the body of the arrow. Take the other two and tape them under for support.
Step 16
All you need to do is sharpen one end and cut a knoch in the other end.