How to Make a Ninja Sword(ninjutao)

today i came up with an idea to make a ninja sword after watching deadliest warrior.by the way it was awesome.Any way when i saw the ninjutao i said(thought) hey that looks pretty easy to make.Well it is.it looks cool dosent it, kitty approval is also a really good way to find any bad spots.(or if the cat just dosent wanna be circumsised)by the way this is my first insructable so give lots of criteria.(o and camisado your on a lot of instructables comments so and ive noticed you like to fight so dont go b******g on my instructable.)

materials:
wood (lots of it)
a jar grip
scrap wood or a wood brace
wood glue
saw
staples and staple gun (or just the wood glue but you're gonna need a clamp)
vice is preffered
optional:spray paint

take your piece of wood and cut a piece abot the length of both of your hands plus two -three inches(pic 1).take the piece of wood and cut a grove in it big enough to fit 1 hand in it(.Preffered:bandsaw)pic 2).Then put the grip aroung it and staple with the staple gun (Pic 3)plus cut a 45 angle on the TOP!

get your big piece of wood and cut off however long you want your blade to be.mines about 2 and half feet long but however your opinion fits.(pic 1)
Cut one end of the blade at a 45 degree angle or at least so it matches up with the handle.(Pic 2)
file down any sharp edges on the ENDS.(Pic 3)

now glue together and staple slash tack in the two pieces of scrap wood on the SIDES and paint is optional.
Next let the glue dry then saw the TOP of the BLADE at a 45 degree angle(Pic 1) and voila(pic 2,3,4)See you next time on weekly ninja.