How to Make a Simple Iron Man Hand Repulsor

For this project u will need simple tools and parts
check my other instructables and the latest one is how to make a spud gun

5-blue leds
wire
velcro 
1-bottle cap 
pcb board 
card board

TOOLS
hot glue gun and stick
soldering wire and rod 
mini drill or any sharp pointy thing to make holes
wire stripper 
nose tip plier

the leds should be solder in parallel as shown in the diagram

drill two holes for the leds it depends on u where your leds poles come next solder the poles with wire and a switch

in this one band will be used to hold ur  battery  and other for ur hand repulsor
1-MAKING BAND FOR YOUR BATTERY-
u will need velcro for this ,make sure that the rough part of the velcro must be shorter than the other one 
now to stick it one side of the velcro should be on the opposite side of the other velcro 
see in the diagram
2-making the band for your palm -
cut a cardboard which is smaller than your palm 
next glue the velcro on the sides of the remember u should place the velcro the same as u placed in the previous one and the length of the velcro must hands breadth  size .
at the center of the card board place the the bottle cap.

lets see how it looks in dark