How to Make an Air Gun

by jay walters in Outside > Launchers

90252 Views, 21 Favorites, 0 Comments

How to Make an Air Gun

$C:\Documents and Settings\User1\My Documents\Photo-0041.jpg$

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0036.jpg$

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0035.jpg$

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0037.jpg$

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0039.jpg$

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0038.jpg$

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0040.jpg$

HOW TO MAKE AN AIR GUN IN 5 SIMPLE STEPS

MATERIALS:
1 BOTTLE
1 GAGE
1 LONG PIPE
1 HOSE GUN OR AIR LINE FITTING
1 COPPER PIPE
1 CONNECTOR (BOTTLE TO PIPE)
1 BIKE VALVE

Makeing the Air Chamber

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0036.jpg$

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0038.jpg$

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0040.jpg$

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0037.jpg$

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0039.jpg$

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0035.jpg$

FIRST GET THE BOTTLE AND THE BIKE VALVE. DRILL A HOLE IN THEN BOTTLE BIG ENOUGH FOR THE BIKE VALVE TO FIT THROUGH THEN DROP THE BIKE VALVE IN THE BOTTLE THEN POKE IT THROUGH THE HOLE GLUE THE BIKE VALVE SO AIR CANT GET THROUGH OR YOU CAN USE PVC PIPE INSTEAD OF A BOTTLE.

Putting the Gage On

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0035.jpg$

DRILL A HOLE I THE SIDE OF THE BOTTLE AND THEN PUT A BIT OF GLUE AROUND THE EDGE THEN SCREW THE GAGE ON (THE GLUE IS TO GIVE THE GAGE MORE SUPPORT AND MAKE SURE THE AIR DOESNâT COME OUT)

Connecting the Pipe to the Bottle

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0037.jpg$

GLUE THE CONNECTOR IN THE END OF THE BOTTLE THEN PUT A BIT OF GLUE AROUND THE END OF THE CONNECTOR THEN PUT THE PIPE ON TO IT

Connecting the Trigger to the Pipe

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0039.jpg$

CONNECT THE END OF THE PIPE TO THE HOSE GUN OR AIR LINE CONNECTOR

Connecting the Barrel to the Gun

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0038.jpg$

CONNECT THE COPPER PIPE TO THE HOSE GUN OR AIR LINE CONNECTOR I USED A PIECE OF RUBBER PIPE TO CONNECT THE AIR LINE CONNECTOR TO THE COPPER PIPE BECAUSE IT WOULDN'T FIT STRAIT ON.

How to Use It

$C:\Documents and Settings\User1\My Documents\jays mobile\Photo-0040.jpg$

PUMP THE BOTTLE UP AS MUCH AS YOU WANT USING THE BIKE VALVE AND A PUMP THEN PUT SOMETHING IN THE BARREL THEN PRESS THE TRIGGER