I-mate Pocket PC From Inside Out

by hosam_eldin in Circuits > Computers

4411 Views, 4 Favorites, 0 Comments

I-mate Pocket PC From Inside Out

$D:\Personal\Electronics\PDA images\i-mateppcphone.jpg$

$D:\Personal\Electronics\PDA images\PDA 006_.JPG$

$D:\Personal\Electronics\PDA images\PDA 011_.JPG$

$D:\Personal\Electronics\PDA images\PDA 012_.JPG$

$D:\Personal\Electronics\PDA images\PDA 007_.JPG$

$D:\Personal\Electronics\PDA images\PDA 010_.JPG$

$D:\Personal\Electronics\PDA images\PDA 009_.JPG$

$Z:\My_Work\My electronic Projects\PDA images\PDA 002_.JPG$

$D:\Personal\Electronics\PDA images\PDA 004_.JPG$

In this article i will describe how to change the the i-mate pocket PC speaker, or any removable item such as the cam module, internal backup battery ... etc.
You should have the proper tools and skills in order to not damage your pocket PC.

Removing the Antenna Cover

$Z:\My_Work\My electronic Projects\PDA images\PDA 002_.JPG$

Remove the back cover to see the antenna module

Antenna

$D:\Personal\Electronics\PDA images\PDA 004_.JPG$

Now you see the antenna module, carefully remove it

Step3

$D:\Personal\Electronics\PDA images\PDA 006_.JPG$

Remove the back screws,then remove the device back.
( note that the gurantee will be violated )

Step4

$D:\Personal\Electronics\PDA images\PDA 007_.JPG$

Now you see the main board
( See notes for more information )

Step5

$D:\Personal\Electronics\PDA images\PDA 011_.JPG$

Now the speaker module is removed, it's an example on how to remove any failed component.

Step6

$D:\Personal\Electronics\PDA images\PDA 012_.JPG$

A close view of the removed speaker.