Ipod Nano Dock (2nd Generation)
by fredricksburgthethird in Living > LEGO & K'NEX
2893 Views, 0 Favorites, 0 Comments
Ipod Nano Dock (2nd Generation)
In this instructable you will create an awesome ipod dock.
Some parts are optional.warning i am not liable for any pirated files downloaded through this dock.
Some parts are optional.warning i am not liable for any pirated files downloaded through this dock.
Supplies
The picture has all the supplies you need.
Build the Conector.
get two yellow conectors, and place tape on both of them as seen in the photo. after this place the dock connector inbetween the two pices. then add the four small rods.
the reason for this part is simple, i have built another knex ipod dock and you coudnt just put the pod down or pull the pod up, the connector was not secured at all, so my awnser, ducttape.
the reason for this part is simple, i have built another knex ipod dock and you coudnt just put the pod down or pull the pod up, the connector was not secured at all, so my awnser, ducttape.
Build the Back.
just build what is in the photo, one pic is a front image and the other is the back view.
Build the Base.
build the base, again its two different views.
Put It Together.
attach the base to the connector, and the connector to the back.
look at the photos
look at the photos
You Are Now Done. Unless You Want the Extras.
to add the extras you will need to build this.
Put the Rest of It Together.
follow the photos.